UPSTONE


UPSTONE - More information about UPSTONE

Kreg Tool Company KHI-SLIDE Drawer Slide Jig


Kreg KHI-SLIDE - The slides have to be level, straight, and positioned properly, or the drawers won’t operate well. With this jig, you’ll know that your slides are positioned correctly, so your drawers will operate smoothly. The drawer slide jig takes the guesswork out of the process by indexing with the cabinet frame or side on frameless cabinets for perfect alignment.

Whether you’re updating cabinets or you’re building a project from scratch, mounting drawers is always a challenge. The brackets are also reversible to protrude from the cabinet, and then clamp in place perfectly aligned to support the drawer as you mount the slides to the drawer box, too. Plus, epoxy-coated, the Jig works with ball-bearing, and undermount slides for perfect positioning every time.

Kreg Tool Company KHI-SLIDE Drawer Slide Jig - Reversible to mount slides to cabinet and drawer box. The drawer slide Jig takes the guesswork out of installing drawer slides. The jig supports the drawer slide level and straight while you install it in the cabinet. Accurate slide positioning with built-in indexing tabs. Then, the jig clamps on so it protrudes from the cabinet to support the drawer while you drive screws into the drawer box.

The drawer slide jig consists of two brackets that clamp in place inside the cabinet—one on each cabinet side—and align with the cabinet face frame or with designated marks on frameless cabinets to support the drawer slide as you drill mounting holes.

More information about Kreg KHI-SLIDE


Similar products



Kreg Tool Company KHI-PULL Cabinet Hardware Jig


Kreg KHI-PULL - The cabinet hardware jig provides a simple solution for the intimidating task of drilling mounting holes for cabinet knobs and pulls. This allows you to confidently drill straight, accurately positioned holes. The cabinet hardware jig takes all the guesswork out of the process by allowing you to drill straight, accurately positioned holes every time, so you’ll know that every piece of hardware is positioned correctly and consistently.

Versatile for mounting single and multi-hole knobs. Reversible to mount slides to cabinet and drawer box. Whether you’re updating your cabinets or you’re building a project from scratch, adding hardware like knobs and pulls is often one of the final steps—and one of the most intimidating. Versatile for use in cabinets, cases, and more.

The cabinet hardware jig features moveable, hardened-steel drill guides that lock in place to align with common hole-spacing measurements for cabinet knobs and pulls. Drill the holes incorrectly, and it can be very difficult to correct the mistake. Accurate slide positioning with built-in indexing tabs. Whether you’re installing one new knob or dozens of drawer pulls, the Jig ensures that you’ll drill accurately and consistently every time, so you get results that exceed your expectations.

Kreg Tool Company KHI-PULL Cabinet Hardware Jig - A moveable edge guide and built-in measuring scales in imperial and metric ensure that those holes will be positioned where you want it every time, which means you can drill as many holes as you need without the uncertainty and potential mistakes that can come with measuring and marking every one. The movable edge guide and measuring scales make it easy to position knobs precisely, while adjustable drill guides ensure straight holes for perfect knob and pull positioning every time.

More information about Kreg KHI-PULL


Similar products



Blum 38N355BE08x10 Compact Soft-Close 1/2'' Overlay Blumotion Hinge, Nickel Finish Pack of 10


Blum 38N355BE08x10 - Repeatable results without measuring and marking. Versatile for use in cabinets, cases, and more. Built-in measuring scales for repeatable results . Install knobs and pulls the Worry-Free Way - with Easy, Repeatable Accuracy. Includes 8 hinges. Install drawer slides the fast, Easy Way for Drawers That Fit Perfectly Every Time and Slide Smoothly.

Adjustable edge guide for easy positioning . Adjustable guides for accurate hole placement. Reversible to mount slides to cabinet and drawer box. Measure how much the cabinet door covers the face of the cabinet on the hinge side. To use this hinge the dimension overlay should be 1/2". Versatile for mounting single and multi-hole knobs.

Blum 38N355BE08x10 Compact Soft-Close 1/2'' Overlay Blumotion Hinge, Nickel Finish Pack of 10 - Nickel finish. Accurate slide positioning with built-in indexing tabs. To determine the needed overlay. Screw on designed for Face Frame Application. 1/2 inch.

More information about Blum 38N355BE08x10


Similar products



Kreg KHC-PREMIUM Face Clamp


Kreg KHC-PREMIUM - Install knobs and pulls the Worry-Free Way - with Easy, Repeatable Accuracy. Used primarily for securing individual joints while Pocket-Screws are being driven. Screw on designed for Face Frame Application. Built-in measuring scales for repeatable results . Best for a majority Of Pocket-Screw Applications. Nickel finish.

Unique clamp designed specifically for Pocket-Screw Joinery. Adjustable guides for accurate hole placement. Clamp can also be used to secure Portable Kreg Jigs To The Work Piece. Accurate slide positioning with built-in indexing tabs. Reversible to mount slides to cabinet and drawer box. Install drawer slides the fast, Easy Way for Drawers That Fit Perfectly Every Time and Slide Smoothly.

Kreg KHC-PREMIUM Face Clamp - Versatile for mounting single and multi-hole knobs. 1/2 inch. Unique clamp designed Specifically For Pocket-Screw Joinery. Includes 8 hinges. Adjustable edge guide for easy positioning . The large face of the clamp keeps the joint perfectly flush.

More information about Kreg KHC-PREMIUM


Similar products



Kreg SML-C125-500 1-1/4-Inch #8 Coarse Pocket Hole Screws with Washer-Head, 500-Pack


Kreg SML-C125 - 500 - Accurate slide positioning with built-in indexing tabs. Hole screws prevent overdriving in pocket bottoms. Versatile for use in cabinets, cases, and more. Includes 8 hinges. 1-1/4" screw length for joining 3/4" stock. Self-tapping auger tips do away with predrilling. Reversible to mount slides to cabinet and drawer box.

Versatile for mounting single and multi-hole knobs. Unique clamp designed specifically for Pocket-Screw Joinery. Adjustable guides for accurate hole placement. Nickel finish. Adjustable edge guide for easy positioning . Kreg sml-c125-500 1-1/4-inch #8 coarse pocket hole screws with washer-head, 500-Pack Install drawer slides the fast, Easy Way for Drawers That Fit Perfectly Every Time and Slide Smoothly.

Kreg SML-C125-500 1-1/4-Inch #8 Coarse Pocket Hole Screws with Washer-Head, 500-Pack - Used primarily for securing individual joints while Pocket-Screws are being driven. Battery not included. 1/2 inch. Built-in measuring scales for repeatable results . Large diameter of steel shank creates durable screw. Install knobs and pulls the Worry-Free Way - with Easy, Repeatable Accuracy.

More information about Kreg SML-C125 - 500


Similar products