Top 10 Aluminum Zinc Anode Rod Water Heater – Water Heater Replacement Parts

As an Amazon Associate I earn from qualifying purchases.

1. Kohree

#ad

State, Water Heater Protection Hex Head Flexible Anode Rod Includes 1 Tape Water Heaters Tank 3/4" NPT Threads for Rheem, Kenmore, GE, Richmond, Kohree Aluminum Zinc Anode Rod 44", Reliance

#ad
Kohree #ad - Good suitabilityit is used to replace the rusted bar in the water tank of the water heater, which can be a perfect upgrade for Rheem, and more. Size: 44" long, ge, state, richmond, kenmore, Reliance, 3⁄4" thread, using 1-1 / 16" socket.

It is more durable and safer compared to 316 stainless steel connectors. If you have any questions, just feel free and contact us for help! And we provide a roll of tape to help you tighten the screw for preventing looseness. 100% customer satisfactionproviding high-quality products and excellent service has always been our top priority. Easy installationthe 44" anode rod is hinged into four sections, flexible design allows you to install the rods conveniently even in a narrow place.

Full protectionkohree aluminum zinc anode rod can help you get rid of the unsatisfying rotten egg smell, prevent the water tank from rusting in the metal water tank, and absorb the oxidized substances to prolong the life of the water tank. High quality materialkohree aluminum zinc Anode Rod is made of high-quality aluminum-zinc.
BrandKohree #ad
ManufacturerKohree #ad

2. About Fluid

#ad

About Fluid Aluminum Zinc Replacement Anode Rods for Water Heaters Aluminum ZINC Complete KIT

#ad
About Fluid #ad - Fits: almost all water heaters including; rheem, richmond, reliance, kenmore, ge, state, a o smith and many more that also use the standard ¾" npt anode rod connection. Our licensed Plumbers and Instructors have decades of experience. Each segment can be easily lowered, simply cut it shorter with a hacksaw. Water heater installed in a tight space? even if your water heater is located in a small or tight space, this 44 inch-long rod is hinged into four segments, less than 12 Inches long each.

Change the anode rod, cracks and leaks. If the over-all length is a little too longrare cases, one-by-one, a few common hand tools, a friend and your favorite beverage! not included. The included 1-1/16” deep well socket will fit and remove your old anode rod and install your new anode upgrade. Learn from professionals using our easy-to-follow, and we have included every step in our manual. Eventually, fails, the anode rod is completely consumed usually just before your water heater warranty is up and the Water Heater Tank begins to erode and ultimately rusts, and not your water heater!.

Every Two Years. Get rid of the embarrassing rotten egg smell in your home with our aluminum / zinc anode rod kit! did you know that the magnesium anode rod inside your hot water tank is the number one key contributor to the production of your smelly, hydrogen sulfide gas? About Fluid solved this problem by creating a flexible anode rod made from an Aluminum/Zinc Alloy, instead of magnesium. They gathered together and documented exactly how they install anode rods, Step-By-Step, just to be certain your floors are always dry.
BrandAbout Fluid #ad
ManufacturerAbout Fluid #ad
Height2 Inches
Length15 Inches
Weight2.84 Pounds
Width2 Inches
Part Number43239-30469
ModelALZN44FLEX

3. Eau

#ad

Upgraded, Rheem, 44" Aluminum Zinc Anode Rod, Eau Get Rid of Rotten Egg Smelling Flexible Water Heater Anode Rod for GE, Reliance,Kenmore Water Heater Including 1-1/16" Hex Socket Tool and Teflon

#ad
Eau #ad - Replacement easily - anodes are designed to be easily and regularly replaced. As soon as the anode rod is depleted and fully decayed, fail and leak. Get rid of rotten egg smell - aluminum zinc Alloy sacrificial anode rod made of high-quality Aluminum Zinc Alloy that is key element for permanently eliminate rotten egg smell from water tank.

Fits - almost all water heaters including; a. O. Inspecting and changing your anode rod every 2 years will keep your water heater’s tank, the water heater begins to rust, then crack, strong reliable and off your mind!. Each part is less than 12 Inches allowing you to replace anode rods easily even in a narrow space. Smith, kenmore, rheem, reliance, richmond, State, GE and many more that also use the standard ¾" NPT Anode Rod Connection.

Their only purpose is to decay instead of your water heater, and that's exactly what it will do. Size - flexible 44 inch-long anode rod is hinged into four parts. Just safely cut it shorter with a simple hacksaw. Aluminum zinc anode rod kit - the best choice to extending service life of your water heater tank from corroding is replacing water rod! This water heater anode rod makes it simple with everything you need, Teflon Sealing Tape and 1-1/16” chrome finished socket, Anode Rod, all in one box.
BrandEau #ad
ManufacturerEau #ad
Part Number44 Inch Kit

4. Kelaro

#ad

Aluminum Zinc Water Heater Anode Rod 44-inch Flexible by Kelaro

#ad
Kelaro #ad - Universal fit: compatible with most hot water heaters including AO Smith, Rheem, GE, Reliance, Richmond, Kenmore, State and more.

Removes rotten egg odors sulfur and extends the life of your hot water heater. Save money by changing the water heater anode rod every 2 years, not the whole water heater. Sacrificial rod attracts bacteria from water, rather than allowing it to attack the tank itself. Installs in tight spaces - most water heaters don't have 4 Ft of overhead clearance to install a new solid rod without completely removing the whole heater. Our flexible rod allows in place installation with just over a 12" of clearance.
BrandKelaro #ad
ManufacturerKelaro #ad

5. Corro-Protec

#ad

Eliminate Odor Sulfur/rotten egg smell, Corrosion and Reduce Limescale, Corro-Protec CP-R Water Heater Powered Titanium Anode Rod 40-89 Gallon Tank

#ad
Corro-Protec #ad - Warranty & quality – manufactured right here in canada, our hot water heater anode rod not only extends the life of your tank but is backed by a 20-year warranty. Permanent corrosion protection – designed to replace your 40-89-gallon water heater’s hex head anode rod, it can help defend against any level of water hardness.

Say goodbye to odors – eliminate your water heat odor problem by removing the rotten egg smell caused by hydrogen sulfide with our advanced powered anode rod. Energy efficient design – by reducing mineral accumulation on the tank it can help improve the water quality while reducing stress on the tank to reduce energy costs.

You will need a 1 1/16 '' socket to remove the magnesium anode as well as a 1 3/16 or 31mm socket to install The Corro-Protec. Quick and easy installation – we’ve included an easy-to-follow paper and step-by-step online pdf instructions to make installing your anode rod much easier.
BrandCorro-Protec #ad
ManufacturerCorro-Protec #ad
Height4 Inches
Length16 Inches
Weight0.94 Pounds
Width4 Inches
Part Number96387
ModelCP-R

6. The Water Connection

#ad

Water Connection AR136 Aluminum Zinc Anode Rod

#ad
The Water Connection #ad - Eliminates rotten egg smell in hot water caused by hydrogen sulfide gas H2S and extends service life of water heater tank. 44-inch long solid/continuous anode; can be cut to length to fit different size heaters. Sacrificial anode rod for water heater tank made from aluminum-zinc alloy cures rotten egg sulfur smell in hot water. Replaces water heater tank’s existing magnesium anode rod hex head only. Not recommended when water softener is in use use a powered anode/cathode instead.
BrandThe Water Connection #ad
ManufacturerThe Water Connection #ad
Part NumberModel AR136
Model.

7. Osring

#ad

Osring 44 Inch Zinc Anode Rod for Water Heater, Flexible Anode Rod Kit with Teflon Tape and 1-1/16” Socket Tool, Triple Defense Against Water Odor and Water Tank Inner-Wall Corrosion

#ad
Osring #ad - Efficiently eliminating rotten egg smell in hot water caused by hydrogen sulfide gas H2S and extending service life of your water heater tank. Perfect for most of water heaters, such as rheem and richmond! segmented flexible design keeps water anode rod can be cut to the right length to fit different sizes of heaters, for easy installation with Teflon tape provided! 27mm deep well socket provided for easily replacing the anode rod by taking the hex head out and putting the new one into water heater tank.

Not recommended when water softener is in use! Sacrificial anode rod for water heater tank is made from aluminum-zinc alloy, strongly curing the smell of rotten egg in hot water. Hex plug anode rod with 4/5” diameter has standard 3/4” NPT thread connection.
BrandOsring #ad
ManufacturerOsring #ad

8. Eau

#ad

Rv Heater Anode Rod 2 Pack Eau Aluminum/Zinc Rv Hot Water Tank Anode Rod Suburban and Morflo, Long Lasting Tank Corrosion Protection, 9.25''Long & 3/4'' Thread

#ad
Eau #ad - Rv water heater anode rod exclusive suburban anode rod absorbs the corrosive action accused by hot water and prolongs. Pack of 2: unscrew the anode rod to drain the tank. Smith, reliance, state, rheem, kenmore, richmond, GE and many more that also use the standard ¾" NPT Anode Rod Connection.

As soon as the anode rod is depleted and fully decayed, the water heater begins to rust, then crack, fail and leak. The life of your water heater tank. Get rid of the embarrassing rotten egg smell! did you know that the magnesium anode rod inside your hot water tank is the number one key contributor to the production of your smelly, hydrogen sulfide gas? Aluminum Zinc Alloy sacrificial anode rod made of high-quality Aluminum Zinc Alloy that is key element for permanently eliminate rotten egg smell from water tank.

The rv aluminum/zinc anode rod should be removed from the water heater’s tank annually for inspection and replaced when more than 6” of core wire is exposed at either end of the rod. Always keep a spare in your RV. The rv aluminum/zinc anode rod fits for almost all water heaters including; A. O. The rv anode rod’s size and material type: aluminum/zinc anode rod, 9. 25" long, ¾" threads, uses a 1-1/16’’ socket.
BrandEau #ad
ManufacturerEau #ad

9. The Water Connection

#ad

Water Connection AR145 Aluminum Zinc Anode Rod

#ad
The Water Connection #ad - Not recommended when water softener is in use use a powered anode/cathode instead. Segmented flexible rod for easy installation; can be cut to length to fit different size heaters. Eliminates rotten egg smell in hot water caused by hydrogen sulfide gas H2S and extends service life of water heater tank. Sacrificial anode rod for water heater tank made from aluminum-zinc alloy cures rotten egg sulfur smell in hot water. Standard 3/4" npt x 3" nipple fitting replaces existing water heater tank outlet anode rod.
BrandThe Water Connection #ad
ManufacturerThe Water Connection #ad
Height0.8 Inches
Length48 Inches
Width0.8 Inches
Part NumberAR145

10. Osring

#ad

Including Teflon Tape, Triple Defense Against Water Odor and Inner-Wall Corrosion, Osring Flexible Water Heater Anode Rod 44 Inch with Aluminum Zinc Hex Head

#ad
Osring #ad - Sacrificial anode rod for water heater tank is made from aluminum-zinc alloy, strongly curing the smell of rotten egg in hot water. Hex plug anode rod with 4/5” diameter has standard 3/4” NPT thread connection.

Not recommended when water softener is in use! Perfect for most of water heaters, such as rheem and richmond! segmented flexible design keeps water anode rod can be cut to the right length to fit different sizes of heaters, for easy installation with Teflon tape provided! Easy to replace the anode rod by taking the hex head out and putting the new one into water heater tank. Efficiently eliminating rotten egg smell in hot water caused by hydrogen sulfide gas H2S and extending service life of your water heater tank.
BrandOsring #ad
ManufacturerOsring #ad