Haag 4/09 and 12/1 shingle gauges


Haag Engineering - The thicknesses of new "lifetime" warrantied shingles varied dramatically. Knowing a warranty level can be important in determining what a comparable replacement shingle might be. Any type of shingle 3-tab or laminated made with modified asphalt "impact resistant" does not conform to the 4/09 or the 1/12 Shingle Gauge.

Manufacturer to measure shingle thicknesses and to compare against their warranties. Two gauge set- the 4/09 and the 1/12. Why was the 1/12 shingle gauge created, and why does it not include Laminated Shingles? In early 2011, most asphalt shingle manufacturers introduced "lifetime" limited warranties for their products.

Haag 4/09 and 12/1 shingle gauges - Thus, the 1/12 shingle gauge measures the thickness of 3-Tab shingles, and based on analyses made by Haag, correlates that thickness to a warranty range. Why is the "4/09" shingle gauge still available? Since Haag's "4/09" Shingle Gauge remains accurate on roofs installed before January 2011. Is there any type of shingle the Shingle Gauge cannot measure? Yes.

While the shingle gauge was designed with the strictest analytical tolerances possible, we still consider it an estimating tool due to a small number of shingles which do not conform to the gauge. Haag responded by acquiring 76 models of these shingles from every U. S. The 4/09 shingle gauge measures the thickness of a shingle, and based on analyses made by Haag, correlates that thickness to a warranty level.

More information about Haag Engineering

Johnson Level & Tool 750 Pitch and Slope Locator


Johnson Level & Tool 40-0218 - Just flip the tool over to change the units you're reading. Ideal for identifying roof pitch, stair slope, or drainage angles. Covered by a 1-year limited warranty. 1 year warranty: johnson level warrants this product against defects in material and workmanship for one year after the confirmed purchase date.

At its option, the company will replace or repair the product if it fails under normal use. Designed for carpentry, electrical, plumbing, or HVAC work requiring accurate pitch or slope identification. Designed for durability and easy use, the pitch and slope locater features a high-impact plastic body, black in color, with a clear acrylic lens and easy-to-read graduations.

Johnson Level & Tool 750 Pitch and Slope Locator - Half of the scale is printed in 0-to-90 degrees in two quadrants.

More information about Johnson Level & Tool 40-0218


Similar products



Bon 84-943 Heavy Duty Railroad Chalk Holder


Bon Tool 84-943 - Increases crayon life and protects clothing from being soiled. Designed for carpentry, electrical, plumbing, or HVAC work requiring accurate pitch or slope identification. Designed for durability and easy use, the pitch and slope locater features a high-impact plastic body, black in color, with a clear acrylic lens and easy-to-read graduations.

Half of the scale is printed in 0-to-90 degrees in two quadrants. Just flip the tool over to change the units you're reading. Ideal for identifying roof pitch, stair slope, or drainage angles. Covered by a 1-year limited warranty. Heavy duty plastic. Chalk is not included. For use with all railroad chalk. For use with all brands of railroad chalk.

Bon 84-943 Heavy Duty Railroad Chalk Holder - Chalk not included.

More information about Bon Tool 84-943


Similar products



2 x Grid Type Lettersize 'Freehand Designer' Sheets. Draw Perfect Straight Lines Templates. Grid Type Sheets for Scale Drawings


StraightLines 801GG US - It enables the user to perfectly draw straight lines, parallel lines and right angles onto paper. The freehand designer is an invaluable drawing aid to architects, engineers, designers, builders, surveyors, students and anyone who needs to draw accurate freehand drawings. Your pen or pencil is guided by these pyramids through the drawing paper, enabling the precise drawing of horizontal and vertical lines.

Just flip the tool over to change the units you're reading. Ideal for identifying roof pitch, stair slope, or drainage angles. Covered by a 1-year limited warranty. Heavy duty plastic. Designed for carpentry, electrical, plumbing, or HVAC work requiring accurate pitch or slope identification. Designed for durability and easy use, the pitch and slope locater features a high-impact plastic body, black in color, with a clear acrylic lens and easy-to-read graduations.

2 x Grid Type Lettersize 'Freehand Designer' Sheets. Draw Perfect Straight Lines Templates. Grid Type Sheets for Scale Drawings - Half of the scale is printed in 0-to-90 degrees in two quadrants. 1" grid allows user to do drawings to scale. Enables drawing of horizontal and vertical straight lines freehand. Precise diagonal lines can be drawn via the use of the loose protractor sheet. Any pen or pencil can be used, however for best results, a fine tipped high quality biro is recommended.

More information about StraightLines 801GG US


Similar products



Haag Panel & Membrane Gauge


Haag - Available in metric versions here https://www. Amazon. Com/dp/b01at736N6. Enables drawing of horizontal and vertical straight lines freehand. Thickness gauge for metal roofing or panel Designed for carpentry, plumbing, electrical, or HVAC work requiring accurate pitch or slope identification. Designed for durability and easy use, the pitch and slope locater features a high-impact plastic body, black in color, with a clear acrylic lens and easy-to-read graduations.

Half of the scale is printed in 0-to-90 degrees in two quadrants. Chalk not included. Just flip the tool over to change the units you're reading. Ideal for identifying roof pitch, stair slope, or drainage angles. Covered by a 1-year limited warranty. Heavy duty plastic. 1" grid allows user to do drawings to scale.

Haag Panel & Membrane Gauge - For use with all brands of railroad chalk.

More information about Haag


Similar products



CatManDo Adjuster/Estimator Toolbelt - Standard 30" to 46" waist - CustomToolbelt


CustomToolBelt LLC - 1" grid allows user to do drawings to scale. Enables drawing of horizontal and vertical straight lines freehand. Standard size covers waists of 30"-46". New xl size for waist sizes of 46"-54". For use with all brands of railroad chalk. New multi-tool pouch hold the complete set of the most used tools. Padded pouch, now lengthened to be able to hold water bottles.

Strengthened stress points and wear points reduce wear. The belt also adjusts in width within the various sizes. The clipboard pouch is made to fit on the left of the belt and holds the clipboard and/or tablet/iPad allowing you to collect all the pertinent information in electronic or paper format. Together the system allows the adjuster to safely inspect damages using the proper tools and to collect pertinent scope information all the while their hands are FREE.

CatManDo Adjuster/Estimator Toolbelt - Standard 30" to 46" waist - CustomToolbelt - This system was designed to  last for years and holds a warranty on parts if they become unstitched. Just flip the tool over to change the units you're reading. Ideal for identifying roof pitch, stair slope, or drainage angles. Covered by a 1-year limited warranty. Heavy duty plastic. Available in metric versions here https://www.

More information about CustomToolBelt LLC


Similar products



Stanley 34-130 100-Foot FatMax Long Tape Rule


Stanley 34-130 - Designed for carpentry, plumbing, electrical, or HVAC work requiring accurate pitch or slope identification. Designed for durability and easy use, black in color, the pitch and slope locater features a high-impact plastic body, with a clear acrylic lens and easy-to-read graduations. Half of the scale is printed in 0-to-90 degrees in two quadrants.

Enables drawing of horizontal and vertical straight lines freehand. Just flip the tool over to change the units you're reading. Ideal for identifying roof pitch, stair slope, or drainage angles. Covered by a 1-year limited warranty. Heavy duty plastic. View the fatmax product demo requires flash about stanley FatMax Tape Systems The FatMax family of products has established itself as one of Stanley's most extensive and innovative product families in the company's 161-year history.

Stanley 34-130 100-Foot FatMax Long Tape Rule - 1" grid allows user to do drawings to scale. Long tape rule with 3-to-1 gear drive for faster rewind. For use with all brands of railroad chalk. Features a stainless steel blade, ensuring long life. New multi-tool pouch hold the complete set of the most used tools. Padded pouch, now lengthened to be able to hold water bottles.

More information about Stanley 34-130


Similar products



General Tools 21 US Standard Sheet Metal Round Gage


General Tools 21 - For inquiries, please contact our Customer Service Department at 212-431-6100 Standard sheet metal sizes from 0 to 36" this heavy duty gage is made from hardened and tempered steel, and is stamped with sheet metal sizes on the front and their decimal equivalents on the back. General tools - the precise tool for doing the job exACTLY RIGHT.

True-zero end hook allows accurate inside and outside measurements. Standard size covers waists of 30"-46". New xl size for waist sizes of 46"-54". Work smarter, electrical, plumbing, measure better & be more productive with general tools Designed for carpentry, or HVAC work requiring accurate pitch or slope identification.

General Tools 21 US Standard Sheet Metal Round Gage - Designed for durability and easy use, black in color, the pitch and slope locater features a high-impact plastic body, with a clear acrylic lens and easy-to-read graduations. Half of the scale is printed in 0-to-90 degrees in two quadrants. Stainless steel blade ensures long life; steel roller cage protects case.

Decimal equivalents of each size are stamped on the reverse side of the sheet metal gage. 1" grid allows user to do drawings to scale. Featuring a satin finished, this sheet metal gage is made from hardened and tempered heavy gage steel. We strive to provide our customers with 100% satisfaction.

More information about General Tools 21


Similar products



Ladder Lock, Steel, Trivalent Coating


LADDER LOCK LL-47261-13 - Stainless steel blade ensures long life; steel roller cage protects case. 1" grid allows user to do drawings to scale. Durable, high-impact ABS case; slip-resistant rubber grip. Available in metric versions here https://www. Amazon. Com/dp/b01at736N6. Price for: each standards: osha 191026 for use with: extension ladders item: Ladder Lock Finish: Trivalent Coating Material: Steel Country of Origin subject to change: India.

Stainless steel blade ensures long life; steel roller cage protects case. Durable, high-impact ABS case; slip-resistant rubber grip. For use with all brands of railroad chalk. This sheet metal gage is designed to accurately determine the thickness of uncoated sheet metal, plate iron and steel. Featuring a satin finished, this sheet metal gage is made from hardened and tempered heavy gage steel.

Ladder Lock, Steel, Trivalent Coating - Gage numbers are us standard 0 to 36, based on weights in ounces per square inch. Decimal equivalents of each size are stamped on the reverse side of the sheet metal gage. Standard size covers waists of 30"-46". New xl size for waist sizes of 46"-54". True-zero end hook allows accurate inside and outside measurements.

More information about LADDER LOCK LL-47261-13


Similar products



Leica DISTO D2 New 330ft Laser Distance Measure with Bluetooth 4.0, Black/Red


Leica Geosystems 838725 - Flip out the intelligent end piece to 90º to hook onto outside corners or extend the end piece fully for inside corners. Stanley's limited lifetime warranty; measures 3/8-inch-by-100-feet. Measurements per set of batteries-up to 10000 Bluetooth 4. 0 for transferring measurements into desired software. Durable, high-impact ABS case; slip-resistant rubber grip.

Combined with the min/max function, the end piece allows you to get the tool all the way into corners for accurate Diagonal measurements. Last 10 measurement memory, dimensions : 116 x 44 x 26 mm / 4. 57 x 1. 73 x 1. 02 in. Chalk not included. The d2 new includes a Pythagoras function for indirect height or width measurements.

Leica DISTO D2 New 330ft Laser Distance Measure with Bluetooth 4.0, Black/Red - The d2 new will automatically measure from the end of its flip-out end piece when fully extended. Decimal equivalents of each size are stamped on the reverse side of the sheet metal gage. Standard size covers waists of 30"-46". New xl size for waist sizes of 46"-54". Gage numbers are us standard 0 to 36, based on weights in ounces per square inch.

More information about Leica Geosystems 838725


Similar products



HANSON 10374 Railroad Chalk


TV Non-Branded Items (Home Improvement) 10374 - Price for: each standards: osha 191026 for use with: extension ladders item: Ladder Lock Finish: Trivalent Coating Material: Steel Country of Origin subject to change: India. Produces high visibility markings. 1" grid allows user to do drawings to scale. Ideal for wood, metal and concrete. Featuring a satin finished, this sheet metal gage is made from hardened and tempered heavy gage steel.

Just flip the tool over to change the units you're reading. Ideal for identifying roof pitch, stair slope, or drainage angles. Covered by a 1-year limited warranty. Heavy duty plastic. Enables drawing of horizontal and vertical straight lines freehand. Standard size covers waists of 30"-46". New xl size for waist sizes of 46"-54".

HANSON 10374 Railroad Chalk - Stanley's limited lifetime warranty; measures 3/8-inch-by-100-feet. Intended for temporary use. Measuring units-0000 m, 0'00" 1/16, 000 ft, 0 in 1/16.

More information about TV Non-Branded Items (Home Improvement) 10374


Similar products