Gorilla Gripper 44010 Panel Carrier


Gorilla Gripper 44010 - Ruggedly constructed lifetime tool. Promotes personal safety in multiple ways. Simply slip gorilla Gripper over the center of the panel and lift. It is continuously self-adjusting from 3/8-inch to 1-1/8-inch. The leverage created by the weight of the panel and the unique jaws of the Gorilla Gripper make it easy for one pe Makes it easy for one person to lift and carry sheet goods.

Reduces strain on back, neck, shoulders & arms. Increases carrying capability. Theres just nothing like the Gorilla Gripper. It works! moving plywood, drywall or any sheet goods just got easier. It allows the user to lift and move them with a straight back, eliminating the requirement of bending over to get under the bottom, thus avoiding the torqued back and the aches and pains that are far too familiar to construction workers and do-it-yourselfers.

Gorilla Gripper 44010 Panel Carrier - Its made of aircraft-grade aluminum, very rugged and virtually indestructible. Limited quantity special deals * makes it easy for one person to lift and carry sheet goods * reduces strain on back, with much less strain and greatly reduced risk of injury to the back, shoulders, particleboard, melamine, tempered glass and granite from the top, neck, arms & hands!The gripper works by clamping onto the top of the material, neck, shoulders & arms * Promotes personal safety in multiple ways * Increases carrying capability * Ruggedly constructed lifetime tool The Gorilla Gripper is a unique construction tool that allows one person to lift and carry heavy sheet goods such as plywood, drywall, creating a sturdy temporary handle for the person who is carrying them.

Rubber gripping pads mounted on both plates protect the surfaces of the materials from being damaged or marred.

More information about Gorilla Gripper 44010

Stanley 93-301 14-Inch Yellow Panel Carry Handle


Stanley 93-301 - Provides increased balance and control during transportation. Comes in high-visibility yellow. Dimensions: -14'' handle for extra reach. Angled handles keep hands away from panel for added comfort. 93-301 features: -helps transport building boards and other flat materials with ease. Better balance and control. Better visibility while carrying.

Angled handle keeps hands away from panel for comfort. Panel carry helps you easily hand-carry panels of flat wood or other material. Includes 14-inch handle for extra reach.

More information about Stanley 93-301


Similar products



Gorilla Gripper 'GP' 0 to 3/4" 0 to 22mm


Gorilla Gripper 44009 - Load rating of 200 lbs. Labor-saving. Includes 14-inch handle for extra reach. Ruggedly built; indestructible. Gripping hand tool designed for lifting, carrying and moving a variety of building materials that are large, unwieldy and heavy. Panels of plywood, drywall/wallboard, sheet metal, solid core doors, particle board, solid surface materials, granite, table tops, melamine, marble and more.

. All with surprising ease! the unique gorilla Gripper grips from the top, permitting a full field of vision while carrying, providing wonderful leverage, making it easy to position, and encouraging proper lifting technique. It has a soft-cushioned handle that serves as a lever, using the weight of the panel to create clamping force.

Gorilla Gripper 'GP' 0 to 3/4" 0 to 22mm - With non-marring rubberized gripping pads the gripping plates pivot to remain parallel, self-adjusting to the thickness of the material. An excellent solution for anyone having to move sheet goods, the Gorilla Gripper is likely to be the best investment a construction worker, whether every day or once a year! Considering the importance of a well-preserved back, woodworker or DIY'er will ever make.

. And less expensive than one visit to a Chiropractor! Panel carry helps you easily hand-carry panels of flat wood or other material. Angled handles keep hands away from panel for added comfort.

More information about Gorilla Gripper 44009


Similar products



Full 4x8 Sheet Carrier Board Cart, Table Saw Feed Stand That Allows One Person to Easily Move & Cut 4x8 Sheets, PM-1800 - Bora Panel Carrier


Affinity Tools PM-1800 - The strength to handle several sheets 350 lb. The best way to describe our sheet carrier is - it's like a hand truck specifically made for boards that does so much more. Includes 14-inch handle for extra reach. Imagine handling and moving 4x8 sheets on your own or being able to bring a piece of material from your truck and run it through your Table saw without it ever touching the ground.

Back-saving. It can be flipped up and locked into a level, horizontal table-saw feed stand, the height is fully adjustable from 28" To 38” and the bottom support leg locks into place, giving you the stability you need to cut with confidence. Provides increased balance and control during transportation.

Full 4x8 Sheet Carrier Board Cart, Table Saw Feed Stand That Allows One Person to Easily Move & Cut 4x8 Sheets, PM-1800 - Bora Panel Carrier - Specifically made for sheet materials - ingenious design allows for easy moving of unwieldy sheets of plywood, paneling, MDF and more. Ruggedly built; indestructible. It flips up and adjusts! the support arm can tilt and lock horizontally, and is adjustable from 28" High to 38" High. Load rating of 200 lbs.

Labor-saving. Comes in high-visibility yellow. Automatically clamps onto any stock from 0''-3/4''.

More information about Affinity Tools PM-1800


Similar products



Drywall Fitting Tool, Supports The Board In Place While Installing - BoardMate


Marshall Tools Ltd BM - Boardmate is made of non-wearing ABS Plastic, designed to last forever. Panel carry helps you easily hand-carry panels of flat wood or other material. Specifically made for sheet materials - ingenious design allows for easy moving of unwieldy sheets of plywood, paneling, MDF and more. Frequently Asked Questions Q.

Boardmates Are sold as a set of 2. Any. Flexible - Allows one person efficiently board ceilings. Automatically clamps onto any stock from 0''-3/4''. Load rating of 200 lbs. Labor-saving. Accurate - allows the fixer check the board is perfectly aligned before fixing. It's a table saw feed stand. The support arm can be locked at 90 deg, height adjust and support leg extends for a rock-solid table saw feed stand.

Drywall Fitting Tool, Supports The Board In Place While Installing - BoardMate - Quick - speeds up boarding a ceiling by 50% 2 in a set. Recommended - Boards are left lightly butted as specified by industry. Bora portamate quality - built with meticulous care by Bora Portamate, you'll use this in your shop for years to come. Designed to last forever.

More information about Marshall Tools Ltd BM


Similar products



Calculated Industries 8105 Blind Mark Drywall Electrical Box Cutout Tool – Powerful Rare-Earth Magnetic Targets 3 and Locator Kit


Calculated Industries 8105 - All rights reserved. Panel carry helps you easily hand-carry panels of flat wood or other material. Made in the USA from aircraft aluminum. Bora portamate quality - built with meticulous care by Bora Portamate, you'll use this in your shop for years to come. Angled handles keep hands away from panel for added comfort.

Twice as accurate – no more mis-measured and mis-cut drywall openings or having to patch mis-cuts or need to buy oversize plate covers. Why make drywall installation harder than it has to be? Let Blind Mark take the guesswork and the grunt work out of finding and cutting hidden electrical boxes. Back-saving.

Flexible - Allows one person efficiently board ceilings. Get professional results you can be proud of even if it's your first time hanging drywall with foolproof and trustworthy patented technology that snaps into place; it shows you exactly where to cut. Click the add to cart button now! Copyright 2019 Calculated Industries.

Calculated Industries 8105 Blind Mark Drywall Electrical Box Cutout Tool – Powerful Rare-Earth Magnetic Targets 3 and Locator Kit - Multiple materials – works on drywall, sheetrock, paneling, exterior siding, plywood, masonite, cement board, laminated flooring, particle board, tile backsplashes, slate and more! THIS KIT INCLUDES – 3 targets with super strong magnets enable you to find multiple boxes at once for even greater time savings.

Half the lifting – because you only lift the drywall once to install it you not only finish in half the time but with much less fatigue or chance of injury or damage to fragile drywall corners. Effort - take the neck ache out of holding up plasterboard sheets.

More information about Calculated Industries 8105


Similar products



POWERTEC 71158 Double-Cut Profile Universal T-Track with Predrilled Mounting Holes, 48-Inch, 2-Pack


POWERTEC 71158 - Load rating of 200 lbs. Labor-saving. Predrilled, centered mounting holes for convenient, simple installation. Back-saving. Includes 14-inch handle for extra reach. Recommended - Boards are left lightly butted as specified by industry. It flips up and adjusts! the support arm can tilt and lock horizontally, and is adjustable from 28" High to 38" High.

Versatile universal t-tracks accommodates 5/16-Inch and 1/4-Inch T-bolts, and 1/4-Inch hex-bolts. Great for use with hold-down clamps measuring either 5-1/2 x 1-1/8-Inch or 3-1/2 x 3/4-Inch. Blind mark makes locating and marking outlet boxes problem free; its powerful magnets help you accurately find and outline them for perfect cutouts in less time with less lifting and no measuring.

POWERTEC 71158 Double-Cut Profile Universal T-Track with Predrilled Mounting Holes, 48-Inch, 2-Pack - Get professional results you can be proud of even if it's your first time hanging drywall with foolproof and trustworthy patented technology that snaps into place; it shows you exactly where to cut. The support arm can be locked at 90 deg, height adjust and support leg extends for a rock-solid table saw feed stand.

Constructed of thick extruded anodized aluminum for maximum durability. Angled handles keep hands away from panel for added comfort. Automatically clamps onto any stock from 0''-3/4''. Made in the USA from aircraft aluminum. Ruggedly built; indestructible.

More information about POWERTEC 71158


Similar products



Big Horn 10230 Woodworkers Power Hands Safety Push Stick


Tool Designs 10230 - Quick - speeds up boarding a ceiling by 50% 2 in a set. It flips up and adjusts! the support arm can tilt and lock horizontally, and is adjustable from 28" High to 38" High. Recommended - Boards are left lightly butted as specified by industry. Get professional results you can be proud of even if it's your first time hanging drywall with foolproof and trustworthy patented technology that snaps into place; it shows you exactly where to cut.

Angled handles keep hands away from panel for added comfort. Dimensions: 3/4" width, 3/8" depth, 48" length; allows for easy and solid embedding without sacrificing surface platform integrity. Capacity, with the a 2-1/4" bottom lip of the support arm being wide enough for 2-3 sheets at a time. Rubber pads help absorb vibrations and provide powerful grip.

Big Horn 10230 Woodworkers Power Hands Safety Push Stick - Accurate - allows the fixer check the board is perfectly aligned before fixing. Load rating of 200 lbs. Labor-saving. It's a table saw feed stand. Predrilled, centered mounting holes for convenient, simple installation. Bora portamate quality - built with meticulous care by Bora Portamate, you'll use this in your shop for years to come.

Interchangeable v-groove and flat soles with spring loaded pin at the rear make this oversized push stick a great accessory for shapers, joiners, router tables and table saws.

More information about Tool Designs 10230


Similar products



The Hedgehog Spiral Featherboard for Table Saws, Router Tables, and Band Saws


Brex International, LLC - Get professional results you can be proud of even if it's your first time hanging drywall with foolproof and trustworthy patented technology that snaps into place; it shows you exactly where to cut. Constructed of thick extruded anodized aluminum for maximum durability. Load rating of 200 lbs. Labor-saving.

Angled handles keep hands away from panel for added comfort. Back-saving. Specifically made for sheet materials - ingenious design allows for easy moving of unwieldy sheets of plywood, paneling, MDF and more. Flexible - Allows one person efficiently board ceilings. Perfect drywall cutouts you can be proud of in half the time with NO measuring! Powerful rare-earth magnets that find each other through drywall, eliminates the need for time consuming, error-prone measurements.

The Hedgehog Spiral Featherboard for Table Saws, Router Tables, and Band Saws - The hedgehog has a single knob with a single pivot point for simple and fast adjustments. Comes in high-visibility yellow. Work safer. You can make repeated cuts in a fraction of the time it takes using standard featherboards. Fast and simple. Versatile universal t-tracks accommodates 5/16-Inch and 1/4-Inch T-bolts, and 1/4-Inch hex-bolts.

Work smarter.

More information about Brex International, LLC


Similar products



GRR-RIPPER 3D Pushblock for Table Saws, Router Tables, Band Saws, and Jointers by MICROJIG


MICROJIG, Inc. GR-100 - Made in the USA from aircraft aluminum. The powerful hold, extreme accuracy, and versatile adjustability will help you maximize your materials and greatly improve your protection against dangerous accidents. Fast and simple. Watch the action video and add to your cart today! 100% satisfaction guarantee. Work safer.

Accurate - allows the fixer check the board is perfectly aligned before fixing. 100% satisfaction Guaranteed. 3-directional Force for total control of the workpiece. Perfect drywall cutouts you can be proud of in half the time with NO measuring! Powerful rare-earth magnets that find each other through drywall, eliminates the need for time consuming, error-prone measurements.

GRR-RIPPER 3D Pushblock for Table Saws, Router Tables, Band Saws, and Jointers by MICROJIG - Get professional results you can be proud of even if it's your first time hanging drywall with foolproof and trustworthy patented technology that snaps into place; it shows you exactly where to cut. Automatically clamps onto any stock from 0''-3/4''. Virtually eliminates kickback. Extreme controlthe powerful green grr-rip gives you a commanding hold over the work piece for total control.

Grr-ripper has three legs to give you three-directions of control on the keeper and off-cut work piece. Fully adjustable for easy handling. Flexible - Allows one person efficiently board ceilings.

More information about MICROJIG, Inc. GR-100


Similar products



Festool 482107 Guide Rail Connector


Festool 482107 - Blind mark makes locating and marking outlet boxes problem free; its powerful magnets help you accurately find and outline them for perfect cutouts in less time with less lifting and no measuring. Ruggedly built; indestructible. Work smarter. Angled handles keep hands away from panel for added comfort. Bora portamate quality - built with meticulous care by Bora Portamate, you'll use this in your shop for years to come.

Fast and simple. 3 targets included fit standard single or multi-gang plastic boxes without plugs for both NEW construction or remodels; for receptacles already in place restoration or rehab work, see our Plug Mark. Panel carry helps you easily hand-carry panels of flat wood or other material. Precision cutting and control down to 1/4" Ripping.

Festool 482107 Guide Rail Connector - Pro tip: if your miter slot is a bit wide, insert a flat screwdriver into the slot in the clamp, remove the miter clamp from the Hedgehog, and give it a little twist to make it a bit wider. Single knob and pivot point enables fast and easy adjustability with one hand. Fs/2 guide rails require 2 connectors.

It flips up and adjusts! the support arm can tilt and lock horizontally, and is adjustable from 28" High to 38" High. Dimensions: 3/4" width, 3/8" depth, 48" length; allows for easy and solid embedding without sacrificing surface platform integrity. Use to connect two guide rails for long workpieces.

More information about Festool 482107


Similar products