Amprobe ELS2A AC Line Splitter

#ad
#ad
Amprobe ELS2A #ad - Clamp accessory, ac outlet line splitter allows current measurement on any 2- or 3-wire power cord. 1x loop for direct readings, and 10X loop for low-current measurements. Built-in voltage measurement jacks to check for voltage. Rated for 120V and 15A.

More information about Amprobe ELS2A #ad

Amprobe ST-102B Socket Tester with GFCI

#ad
#ad
Amprobe ST-102B #ad - All amprobe tools undergo rigorous testing to ensure full compliance with the latest IEC and CE safety regulations in Fluke Safety labs for quality and safety you can trust. Amprobe products range from an extensive line of clamp meters and digital multimeters to industry-specific tools for residential/commercial electricians, HVAC/R technicians, utilities and industrial maintenance professionals.

Detect five different wiring faults open ground, open neutral, hot/ground reverse, open hot, and hot/neutral reverse. Ul and csa listed for safety. Tests standard & gfci sockets/outlets/receptacles for proper wiring 110-125V AC. Verify proper wiring of gfci ground fault circuit interrupter and standard US and Canadianwall outlets with a simple push of a button.

More information about Amprobe ST-102B #ad


Similar products



Fluke 325 Clamp Multimeter AC-DC TRMS

#ad
#ad
Fluke FLUKE-325 #ad - Resistance measurement up to 40 Tests standard & gfci sockets/outlets/receptacles for proper wiring 110-125V AC. The fluke true-rms clamp meter is a great clamp meter for general, grab-and-go troubleshooting needs. Meets iec safety standard 61010-1, and is rated for CAT IV installations to 300V and CAT III installations to 600V.

Frequency measurement. The fluke-325 is ideally suited for current measurements up to 400 a in tight cable compartments. Audible continuity sensor confirms that the circuit conducts electricity. Digital clamp meter measures ac current to 400 amp, AC and DC voltage to 600V, and resistance to 4 kilohms. Temperature and capacitance measurement.

Fluke 325 Clamp Multimeter AC-DC TRMS #ad - 400 a ac and dC current measurement. Verify proper wiring of gfci ground fault circuit interrupter and standard US and Canadianwall outlets with a simple push of a button. Detect five different wiring faults open ground, hot/ground reverse, open neutral, open hot, and hot/neutral reverse. Ul and csa listed for safety.

. Jaw opening measures current in a conductor up to 30mm without touching or interrupting the circuit. Ac voltage make for the most accurate measurements on non-linear signals.

More information about Fluke FLUKE-325 #ad


Similar products



Etekcity Digital Multimeter, MSR-C600 Auto-Ranging Clamp Meter

#ad
#ad
Etekcity MSR-C600 #ad - Autoranging clamp multimeter measures AC currents, resistance, AC/DC voltage, and also provides diode and continuity tests. The clamp measures the AC current in a conductor up to 26mm without interrupting the circuit. True rms sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform.

. 400 a ac and dC current measurement. While having the capability to test ac/dc voltage, resistance, continuity and diodes, the built-in clamp enables you to measure AC current without needing to break circuits to come into direct hazardous contact. Etekcity's digital Clamp Multimeter makes household electricity maintenance safe and simple.

Etekcity Digital Multimeter, MSR-C600 Auto-Ranging Clamp Meter #ad - And easier. Verify proper wiring of gfci ground fault circuit interrupter and standard US and Canadianwall outlets with a simple push of a button. Temperature and capacitance measurement. Detect five different wiring faults open ground, open hot, open neutral, hot/ground reverse, and hot/neutral reverse. Ul and csa listed for safety.

With a capacity of 400amps, the clip can comfortably extend to test cords and wires up to 28 mm in diameter. Frequency measurement. Current conductor size: 26mm diameterdiode test: yescontinuity test: yesbattery Life: about 150hours alkaline batteryAC Current:-Range and Accuracy: 2A{4A, ± 2%+8},   200/400A ± 1.

More information about Etekcity MSR-C600 #ad


Similar products



Digital Clamp Meter AC/DC Auto-Ranging 600 Amp Measures Voltage, Resistance, Temp, More Klein Tools CL800

#ad
#ad
Klein - Geneva Supply CL800 #ad - Resistance measurement up to 40 Verify proper wiring of gfci ground fault circuit interrupter and standard US and Canadianwall outlets with a simple push of a button. Low battery indicator and easily accessible battery compartment. Years of field research, combined with extensive input from electricians across America, inspired the development of meters and electrical testers loaded with innovative, time-saving features.

Ac voltage make for the most accurate measurements on non-linear signals. Audible continuity sensor confirms that the circuit conducts electricity. Autoranging clamp multimeter measures AC currents, resistance, AC/DC voltage, and also provides diode and continuity tests. The clamp measures the AC current in a conductor up to 26mm without interrupting the circuit.

Digital Clamp Meter AC/DC Auto-Ranging 600 Amp Measures Voltage, Resistance, Temp, More Klein Tools CL800 #ad - Klein isn't just the name of our company, it's also our family name. Frequency measurement. Comes with a handy carrying pouch, perfect for use while you're on the go. True rms sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform. 400 a ac and dC current measurement.

Jaw opening measures current in a conductor up to 30mm without touching or interrupting the circuit. Built to withstand a 6.

More information about Klein - Geneva Supply CL800 #ad


Similar products



Fluke 323 True-RMS Clamp Meter

#ad
#ad
Fluke Corporation Fluke 323 #ad - Meets iec safety standard 61010-1, and is rated for CAT IV installations to 300V and CAT III installations to 600V. True rms sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform. Operating temp: 32-degree f to 104-degree F 0-degree C to 40-degree C. Tests standard & gfci sockets/outlets/receptacles for proper wiring 110-125V AC.

Test leads measure ac/DC voltage, resistance, continuity, frequency and capacitance and tests diodes. Thermocouple probe measures temperature. Jaw opening measures current in a conductor up to 30mm without touching or interrupting the circuit. Meets iec safety standard 61010-1, and is rated for CAT IV installations to 300V and CAT III installations to 600V.

Fluke 323 True-RMS Clamp Meter #ad - Temperature and capacitance measurement. Resistance measurement up to 40 Low impedance loZ mode for identifying and eliminating ghost or stray voltages. The fluke 323 323-amzn is ideally suited for current measurements up to 400 a in tight cable compartments. Verify proper wiring of gfci ground fault circuit interrupter and standard US and Canadianwall outlets with a simple push of a button.

400 a ac and dC current measurement. Does not measure DC current.

More information about Fluke Corporation Fluke 323 #ad


Similar products



Mastech MS2115A True RMS DIGITAL DC/AC CLAMP METERS Multimeter Amp Voltage R HZ

#ad
#ad
KKmoon MS2115A #ad - Autoranging clamp multimeter measures AC currents, resistance, AC/DC voltage, and also provides diode and continuity tests. The clamp measures the AC current in a conductor up to 26mm without interrupting the circuit. Automatically ranging true mean squared TRMS technology for increased accuracy. Mastech multimeter MS2115B AC digtial clamp meter.

True rms sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform. Meets iec safety standard 61010-1, and is rated for CAT IV installations to 300V and CAT III installations to 600V. Audible continuity sensor confirms that the circuit conducts electricity.

Mastech MS2115A True RMS DIGITAL DC/AC CLAMP METERS Multimeter Amp Voltage R HZ #ad - Low battery indicator and easily accessible battery compartment. Package list: 1 * original mastech ms2115a ac/dc digital multimeter clamp meter 1 * portable bag 1 * Test Cable 1 * Instruction manual BatteryNot Included Tests standard & gfci sockets/outlets/receptacles for proper wiring 110-125V AC. Temperature and capacitance measurement.

Meets iec safety standard 61010-1, and is rated for CAT IV installations to 300V and CAT III installations to 600V. Does not measure DC current. Ac voltage make for the most accurate measurements on non-linear signals. Digital clamp meter measures ac current to 400 amp, AC and DC voltage to 600V, and resistance to 4 kilohms.

More information about KKmoon MS2115A #ad


Similar products



Southwire Tools & Equipment 60030S Circuit Breaker Finder Adapter/Accessory Kit; Includes Alligator Clips And Light Bulb Circuit Adapter Compatible With Southwire's 41210S Circuit Breaker Finder

#ad
#ad
Southwire 60030S #ad - Operating temp: 32-degree f to 104-degree F 0-degree C to 40-degree C. Temperature and capacitance measurement. Mastech multimeter MS2115B. Autoranging clamp multimeter measures AC currents, resistance, AC/DC voltage, and also provides diode and continuity tests. The clamp measures the AC current in a conductor up to 26mm without interrupting the circuit.

Brand new and High Quality Item. Frequency measurement. Perfect electrical accessory for use on 120V AC circuits. Light bulb circuit adapter that allows for rapid location of circuit breakers connected to lighting fixtures. Resistance measurement up to 40 For use on 120V AC circuits. True rms sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform.

Southwire Tools & Equipment 60030S Circuit Breaker Finder Adapter/Accessory Kit; Includes Alligator Clips And Light Bulb Circuit Adapter Compatible With Southwire's 41210S Circuit Breaker Finder #ad - Alligator clips that allow the transmitter to be connected to unterminated branch circuit wiring. Test leads measure ac/DC voltage, resistance, continuity, frequency and capacitance and tests diodes. Thermocouple probe measures temperature. Southwire 60030s adapter kit for circuit breaker finder Tests standard & gfci sockets/outlets/receptacles for proper wiring 110-125V AC.

True rms sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform.

More information about Southwire 60030S #ad


Similar products



VOLTCLAW-12 Nonconductive Electrical Wire Pliers

#ad
#ad
Nonconductive Tool Company, LLC VC12 #ad - For 12 to 14 gauge wires. Frequency measurement. Mastech multimeter MS2115B. Digital clamp meter measures ac current to 400 amp, AC and DC voltage to 600V, and resistance to 4 kilohms. Brand new and High Quality Item. Autoranging clamp multimeter measures AC currents, resistance, AC/DC voltage, and also provides diode and continuity tests.

The clamp measures the AC current in a conductor up to 26mm without interrupting the circuit. Low impedance loZ mode for identifying and eliminating ghost or stray voltages. Removes Twist-on Wire Connectors. The voltclaw12 safely moves electrical wires. True rms sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform.

VOLTCLAW-12 Nonconductive Electrical Wire Pliers #ad - Does not measure DC current. Comes with a handy carrying pouch, perfect for use while you're on the go. It is lightweight and nonconductive. Audible continuity sensor confirms that the circuit conducts electricity. True rms sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform.

Made in USA. Verify proper wiring of gfci ground fault circuit interrupter and standard US and Canadianwall outlets with a simple push of a button.

More information about Nonconductive Tool Company, LLC VC12 #ad


Similar products



Hard Case for Fluke 323/324/325 Clamp Multimeter AC-DC TRMS by Aenllosi

#ad
#ad
Aenllosi #ad - Ac digtial clamp meter. Frequency measurement. Aenllosi hard case for fluke 325/324/323 Clamp Multimeter AC-DC TRMS. 400 a ac and dC current measurement. Automatically enters sleep mode after 15 minutes of inactivity for energy conservation; 1-year warranty and lifetime support from Etekcity. Does not measure DC current.

Operating temp: 32-degree f to 104-degree F 0-degree C to 40-degree C. For 12 to 14 gauge wires. Test leads measure ac/DC voltage, resistance, continuity, frequency and capacitance and tests diodes. Thermocouple probe measures temperature. Features: case is made of supreme quality, anti-shock, water resistant material provides adequate protection from bumps, crush resistant, durable EVA, scratches and splashes.

Hard Case for Fluke 323/324/325 Clamp Multimeter AC-DC TRMS by Aenllosi #ad - With internal mesh pocket can store other accessories at your convenience. Operating altitude to 6562-Foot 2000m. Temperature and capacitance measurement. Detect five different wiring faults open ground, open hot, open neutral, hot/ground reverse, and hot/neutral reverse. Ul and csa listed for safety. Meets iec safety standard 61010-1, and is rated for CAT IV installations to 300V and CAT III installations to 600V.

Aenllosi hard case for fluke 325/324/323 clamp multimeter aC-DC TRMS Tests standard & gfci sockets/outlets/receptacles for proper wiring 110-125V AC.

More information about Aenllosi #ad


Similar products



Signstek UNI-T UT210E Handheld RMS AC/DC Mini Digital Clamp Meter Resistance Capacitance Tester

#ad
#ad
Signstek UT210E #ad - Digital clamp meter measures ac current to 400 amp, AC and DC voltage to 600V, and resistance to 4 kilohms. Frequency measurement. Autoranging clamp multimeter measures AC currents, resistance, AC/DC voltage, and also provides diode and continuity tests. The clamp measures the AC current in a conductor up to 26mm without interrupting the circuit.

Comes with a handy carrying pouch, perfect for use while you're on the go. Does not measure DC current. Meets iec safety standard 61010-1, and is rated for CAT IV installations to 300V and CAT III installations to 600V. Operating temp: 32-degree f to 104-degree F 0-degree C to 40-degree C. Fast delivery time.

Signstek UNI-T UT210E Handheld RMS AC/DC Mini Digital Clamp Meter Resistance Capacitance Tester #ad - Features: case is made of supreme quality, anti-shock, water resistant material provides adequate protection from bumps, crush resistant, durable EVA, scratches and splashes. With internal mesh pocket can store other accessories at your convenience. Verify proper wiring of gfci ground fault circuit interrupter and standard US and Canadianwall outlets with a simple push of a button.

For safely Moving Electrical Wires. Temperature and capacitance measurement. Alligator clips that allow the transmitter to be connected to unterminated branch circuit wiring.

More information about Signstek UT210E #ad


Similar products